branch pipe
英 [brɑːntʃ paɪp]
美 [bræntʃ paɪp]
套管，支管，三通
双语例句
- An adjusting plate for adjusting wind force is mounted on a humidity-discharging branch pipe which is higher than the joint of the humidity outlet and the humidity-discharging branch pipe.
高于排湿口与排湿支管的对接处的排湿支管上装有一个调节风量大小的调节板。 - Welding seam should be numbered according to pipeline medium set, in principle, main pipe prior to branch pipe.
焊缝编号应根据管线介质流向进行编号，原则上应先主管后支管。 - An approximate method for calculating the elastic stresses at the squeeze at the squeeze corner sections of an identical diameter Tee branch pipe connection under internal pressure was presented.
针对石油化工行业大量采用的等径挤压三通，提出了一个计算内压载荷下的纵向平面内挤压圆角处各应力分量的近似方法。 - Experimental research on resistance properties for changeable angle Y-shaped branch pipe in pneumatic conveying
变角度Y形分支管气力输送流动阻力特性研究 - The diameter ( opening position, outer painting) of this branch pipe is not correct. It must be fabricated in accordance with the drawing.
这一支管通径（开的位置，外部涂装）不对，一定要按照图纸施工。 - A plurality of side barbs are distributed around the central main barb, with every fishing line on every side barb threading a plastic branch pipe of an inside lining steel wire.
在中心主钓周边分布有若干旁钩，旁钩上的鱼线穿套在内衬钢丝的塑料支管内，塑料支管的中部通过连接件固接在基座的下部； - Both ends of the three-tiered water collecting branch pipe respectively communicate with the corresponding three-tiered horizontal water collecting pipe on both sides.
三层集水支管的两端分别与两侧相应的三层水平集水管相连通。 - Numerical Simulation of Gas-solid two Phase Flow in Y-shape Branch Pipe
Y型分支管内气固两相流动的数值模拟 - Numerical simulation and experimental study on the drawing forming of branch pipe of tee joint
大口径三通支管拉拔成形数值模拟与试验研究粘结型锚杆拉拔承载力的试验与理论分析 - Research on Resistance Properties for Y Type Branch Pipe in Pneumatic Conveying Process
气力输送Y型分支管网流动阻力特性的研究 - Make the nest among the branch Pipe.
在我浓密的树枝间筑巢、叫叫。 - Experimental Study and Numerical Simulation of the Flow Distribution Characteristics of a Gas-solid Two-phase Y-shaped Branch Pipe Network
旋流泵气液、固液两相流输送特性试验及数值模拟气固两相Y型分支管网流量分配特性的试验研究与数值模拟 - Flow Distribution Characteristics and Prediction of Y-Shaped Branch Pipe in Gas-Solid Two-Phase
气固两相Y型分支管网流量分配特性的研究与预测 - The main pipe, the branch pipe, and the breathing pipe all are hoses.
主管、支管和通气管均为软管。 - Study on the Design Method of Underground Crescent-rib Reinforced Branch Pipe
地下埋藏式内加强月牙肋钢岔管设计方法研究 - The respective resistance properties for branch pipe were investigated through experiments and GRNN neural network when both conveying velocity and the flow valve opening of branch pipe were changed.
通过试验和GRNN神经网络对输送表观气速和两分支管路流量控制阀开度发生变化时，各分支管路中的阻力特性进行了研究。 - So the design and study of branch pipe is one of the important parts in the steel design.
所以岔管的设计和研究是输水建筑物系统设计和研究的重要内容之一。 - When in use, the indicating pointer of a valve plate is rotated to point to some branch pipe on the dial plate, and the liquid of the liquid inlet main pipe flows to the branch pipe.
使用时，转动阀盘指针对准刻度上的某一支管，进液主管的液体就流向该支管。 - The air inlet of the inflator can be tightly plugged in the valve inside the branch pipe port to open the valve.
充气器的进气口可插紧在支管口内的阀门中，开启阀门。 - A steel branch pipe is a common constitution in pipeline engineering.
钢岔管是管道工程中常见的结构。 - The mid portion of the plastic branch pipe is fixedly arranged at the lower portion of a base through a connecting piece.
连接件的下端挂接饵簧，中部穿过基座的芯孔，上端穿出在基座上插接的塑料管后接挂绳； - The paper investigated the flow distribution of solid phase and the respective resistance properties of branch pipes when both conveying velocity and the flow valve opening of branch pipe are changed.
通过试验，当输送气速和分支管路流量控制阀开度变化时，对分支管路各自的阻力特性和固相颗粒在各分支管路中的流量分配特性进行了研究。 - Duct branch is rich in natural form of uniform distribution, wall smooth, branch pipe and tube diameter on the transition to a flat.
导管分支丰富，形态自然，分布均匀，管壁光滑，分支导管与上一级导管管径过渡平缓。 - An experimental study is conducted on the limit moment of branch pipe under the lateral and longitudinal moment loads.
对模型支管在横向和纵向弯矩作用下结构的极限弯矩进行了试验研究。 - Pneumatic conveying experiments of different particle diameter sands were carried out using compress air at horizontal tee branch pipe.
在水平T形分支管道中，用压缩空气作为输送气体，对不同粒径的砂石进行气力输送试验。 - Development and Research on System for Computer Aided Design of Rib Reinforced Branch Pipe of Hydropower Station
水电站月牙肋钢岔管计算机辅助设计系统开发与研究 - The rib reinforced branch pipe is a combination structure of steel shells and reinforced rib.
月牙肋钢岔管是由空间薄壳和内加强肋构成的组合结构，其体形复杂，结构计算及有限元网格剖分难度较大，需要耗费大量工时。 - A double discone antenna is integrated by the coaxial branch pipe.
利用共轴型同轴线分支结构，实现了双盘锥天线一体化； - The branch pipe system includes main pipe, branch pipe and nested branch pipe.
分支管路系统包括主管路、分支管路和嵌套分支管路。 - According to the flow field calculation of gas valve installed in different locations, the conclusion is that the installation position of gas valve should be as close as possible to the connecting branch pipe.
对燃气阀在不同安装位置的流场进行了计算，得出了燃气阀的安装位置应该尽量靠近连通支管的结论。